What sizes does this cover?

The Socket & Wrench Size pack covers standard metric hex bolts from M3 to M36 and imperial hex bolts from 1/4" to 1-1/2". These are the most common sizes in hardware stores and automotive work.

Are these sizes guaranteed correct?

Sizes are based on ISO and SAE standards for standard hex head bolts and nuts. Actual fasteners vary by manufacturer, grade, and application. Always verify with the fastener when precision matters.

What about Torx, spline, or specialty fasteners?

This tool covers hex head fasteners only. Torx, spline, 12-point, and other drive types are not yet supported.

Can I use the nearest imperial socket on a metric bolt?

In a pinch it may work, but risks rounding the fastener head. Use the correct socket whenever possible. Related values shown are for reference, not substitution.

Will more packs be added?

Yes. Pilot Hole, Tap Drill, and Metric/Imperial conversion packs are planned. The architecture supports new reference sets without changing the app.

M24 Bolt Torque — 470 ft-lbs (640 N·m)

Reference Class 8.8 torque for a M24 hex bolt: 470 ft-lbs (640 N·m). Lubricated: 353 ft-lbs (480 N·m).

Result

Answer

470 ft-lbs (640 N·m)

Standard

BuyM24 bolt Torque wrench Wrench set

Torque470 ft-lbs / 640 N·m

Torque (lubricated est.)353 ft-lbs / 480 N·m

Bolt ClassClass 8.8

ThreadM24x3

Recommended Drive1/2" drive

A M24x3 Class 8.8 bolt: reference torque 470 ft-lbs (640 N·m). Lubricated estimate: 353 ft-lbs (480 N·m). Always verify with the fastener manufacturer and use a calibrated torque wrench.

Note

Reference value from published fastener data. Always verify with the fastener manufacturer for critical applications.

Related Sizes

← M22 bolt M27 bolt →

About M24 Bolt Torque

An M24 hex bolt (Class 8.8): reference torque is 470 ft-lbs (640 N·m), with a lubricated estimate of 353 ft-lbs (480 N·m). Standard thread pitch is 3mm (coarse) or 2mm (fine). Use a 1/2" drive torque wrench. Actual torque depends on thread condition, lubrication, and joint design — always verify with the fastener manufacturer.

← Look up another bolt size