What sizes does this cover?

The Socket & Wrench Size pack covers standard metric hex bolts from M3 to M36 and imperial hex bolts from 1/4" to 1-1/2". These are the most common sizes in hardware stores and automotive work.

Are these sizes guaranteed correct?

Sizes are based on ISO and SAE standards for standard hex head bolts and nuts. Actual fasteners vary by manufacturer, grade, and application. Always verify with the fastener when precision matters.

What about Torx, spline, or specialty fasteners?

This tool covers hex head fasteners only. Torx, spline, 12-point, and other drive types are not yet supported.

Can I use the nearest imperial socket on a metric bolt?

In a pinch it may work, but risks rounding the fastener head. Use the correct socket whenever possible. Related values shown are for reference, not substitution.

Will more packs be added?

Yes. Pilot Hole, Tap Drill, and Metric/Imperial conversion packs are planned. The architecture supports new reference sets without changing the app.

M30 Bolt Torque — 950 ft-lbs (1290 N·m)

Reference Class 8.8 torque for a M30 hex bolt: 950 ft-lbs (1290 N·m). Lubricated: 713 ft-lbs (968 N·m).

Result

Answer

950 ft-lbs (1290 N·m)

Standard

BuyM30 bolt Torque wrench Wrench set

Torque950 ft-lbs / 1290 N·m

Torque (lubricated est.)713 ft-lbs / 968 N·m

Bolt ClassClass 8.8

ThreadM30x3.5

Recommended Drive1/2" drive

A M30x3.5 Class 8.8 bolt: reference torque 950 ft-lbs (1290 N·m). Lubricated estimate: 713 ft-lbs (968 N·m). Always verify with the fastener manufacturer and use a calibrated torque wrench.

Note

Reference value from published fastener data. Always verify with the fastener manufacturer for critical applications.

Related Sizes

← M27 bolt M33 bolt →

About M30 Bolt Torque

An M30 hex bolt (Class 8.8): reference torque is 950 ft-lbs (1290 N·m), with a lubricated estimate of 713 ft-lbs (968 N·m). Standard thread pitch is 3.5mm (coarse) or 2mm (fine). Use a 1/2" drive torque wrench. Actual torque depends on thread condition, lubrication, and joint design — always verify with the fastener manufacturer.

← Look up another bolt size