What sizes does this cover?

The Socket & Wrench Size pack covers standard metric hex bolts from M3 to M36 and imperial hex bolts from 1/4" to 1-1/2". These are the most common sizes in hardware stores and automotive work.

Are these sizes guaranteed correct?

Sizes are based on ISO and SAE standards for standard hex head bolts and nuts. Actual fasteners vary by manufacturer, grade, and application. Always verify with the fastener when precision matters.

What about Torx, spline, or specialty fasteners?

This tool covers hex head fasteners only. Torx, spline, 12-point, and other drive types are not yet supported.

Can I use the nearest imperial socket on a metric bolt?

In a pinch it may work, but risks rounding the fastener head. Use the correct socket whenever possible. Related values shown are for reference, not substitution.

Will more packs be added?

Yes. Pilot Hole, Tap Drill, and Metric/Imperial conversion packs are planned. The architecture supports new reference sets without changing the app.

29mm → 1-1/8" Imperial

The nearest imperial equivalent of 29mm is 1-1/8" (0.42mm difference).

Result

Answer

1-1/8" (28.58mm)

Standard

Buy29mm socket SAE conversion set Metric + SAE combo set

Input Size29mm

Nearest Imperial1-1/8" (28.58mm)

Difference0.42mm

Second Nearest1-3/16" (30.16mm, 1.16mm off)

SystemMetric → Imperial

A 29mm socket or wrench is closest to 1-1/8" imperial (28.58mm), a difference of 0.42mm. Close enough for most jobs, but use the correct size when precision matters.

Note

Reference value from published fastener data. Always verify with the fastener manufacturer for critical applications.

Related Sizes

← 28mm 30mm →

About 29mm Conversion

A 29mm metric socket or wrench is closest to 1-1/8" imperial (28.58mm), with a difference of 0.42mm. The sizes are close enough for most applications, but always use the correct metric socket when precision matters. The second-nearest imperial size is 1-3/16" (30.16mm, 1.16mm off). Large fasteners. When working on mixed metric and imperial fasteners, a combination socket set covers both systems and eliminates guesswork.

← Look up another size